| |
|
|
| |
AN-423 is designed for making corner jointer notches for rectangular logs.
Possible Notching Modes:
- Complete four-sided notching.
- Complete four-sided notching at log end.
- Side notching
- Upper notching / bottom notching.
|
 |
 |
|
Double match |
Single match |
|
|
| AN-423 |
Vertical Notching Unit |
| Log thickness (Max.) |
230mm |
Spindle diameter |
50mm |
| Log width (Max.) |
230mm |
Cutterhead length (Max.) |
200mm |
| Notching depth (Max.) |
70mm |
Cutterhead diameter (Max.) |
230mm |
| |
|
Spindle speed |
4,000mm |
| Motor Powers |
Horizontal Notching Unit |
| Horizontal notching unit |
5HP x 2 |
Spindle diameter |
50mm |
| Vertical notching unit |
5HP x 2 |
Cutterhead length (Max.) |
200mm |
| Hydraulic unit |
3HP |
Cutterhead diameter (Max.) |
230mm |
| Total power |
23HP |
Spindle speed |
4,000mm |
| * All specifications and design characteristics shown in this catalogue are subject to change without notice. |
|
|
|
|
|
The machine is equipped with four notching units, two on horizontal guides and two on vertical guides. Movements of units are performed by means of hydraulic cylinders. |
| |
|
|
