Automatic Planer Hand Jointer
 
 


A Heavy Duty Planer Series

FEATURES

  • Equipped with a digital position controller for accurate and convenient thickness adjustment.
  • Straight cutterhead is standard. Helical cutterhead and quick change cutterhead are optional.
  • Varable feed speed is controlled by a frequency inverter.
  • Powered table elevation provides effortless and fast thickness adjustment.
  • The table is supported by 4 oversized columns thereby featuring maximum rigidity and stability.
  • The table elevation is transmitted by 4 precision ball screws for accurate positioning and smooth movement (Model AN-940 and AN-952 only)
  • The massive cast iron table is precision ground.
  • Automatic power-off function is activated when the top cover is opened.
  • Choice of rubber or steel infeed and outfeed roller.
  • Anti-kickback fingers for operators' safety.
 Special Lever Type Pressure Mechanism
Eliminating the conventional sliding block pressure device, the planer is designed with a new lever type pressure mechanism to increase pressure stability.
 
 SPECIFICATIONS
MODEL AN-932 AN-940 AN-952
Table area 813x 1000 mm 1016 x 1100 mm 1320 x 1100 mm
Max. planing width 813 mm 1016 mm 1320 mm
Max. planing thickness 300 mm 300 mm 300 mm
Min. planing thickness 3 mm 3 mm 3 mm
Max. cutting depth 9 mm 9 mm 9 mm
Knives Straight cutterhead 4 4 4
Helical cutterhead 6 Slots / 206 pcs 6 Slots / 258 pcs 6 Slots / 336 pcs
Knife sizes Straight cutterhead 813 x 32 x 6 mm 1016 x 32 x 6 mm 1320 x 32 x 6 mm
Helical cutterhead 14 x 14 x 2.0 mm 14 x 14 x 2.0 mm 14 x 14 x 2.0 mm
Cutterhead speed 5000 rpm 5000 rpm 5000 rpm
Cutterhead diameter 125 mm 125 mm 125 mm
Cutterhead motor 15 HP 20 HP 25 HP
Elevation motor 1/4 HP 1/2 HP 1/2 HP
Feed speed 5-20 m/min 5-20 m/min 5-20 m/min
Feed motor 1 HP 2 HP 2 HP
Net weight 1100 kgs 1250 kgs 1800 kgs
Gross weight 1250 kgs 1450 kgs 2000 kgs
Packing size (L x W x H) 142x112x143 cm 180x136x150 cm 210x136x150 cm
Machine size (L x W x H) 135x118x135 cm 156x118x135cm 186x118x135 cm
* All specifications and design characteristics shown in this catalogue are subject to change
   without notice.

 

Digital Position Controller
Thickness of cut can be set by the digital position controller thereby providing high accuracy thickness control.

 

Hand Chrome Plated Table
(Model AN-940 and AN-952 only)
The table surface is hard chrome plated for maximum wear resistance and upgrading workpiece feeding effect.
 
Precision Ball Screws
(Model AN-940 and AN-952 only)
The table elevation is transmitted through 4 oversized ball screws providing high positioning accuracy and extra smooth elevation motion.
 
Easy Adjustment of Table Rollers
The table rollers are easily adjusted by simply shifting a front-mounted adjustment lever. Both table rollers are adjusted in sync for convenience.