Helical Cutterheads
 
 


Rotary Helical Cutterheads
(insert 15 x 15 x 2.5 with 150mm radius)

FEATURES

  • Curved edge inserts ensure tear-free cutting and create finer surface effect.
  • 15 x 15 x 2.5mm inserts with 150 mm radius.
  • The inserts are arranged according to helix angle, assuring superior cutting performance.
  • The cutterhead body is manufactured from aluminum alloy, anodized, dyed and dynamically balanced for extra smooth running. 50mm radius)

    Curved Edge Insert
PART NO. CUTTING
CIRCLE		 CUTTING
LENGTH		 BORE
DIAMETER		 SLOTS BORE SIZE **
HAR125100**6R15 125 100 ** 6   1-1/4" 32
HAR125150**6R15 125 150 ** 6   35 mm 35
HAR125230**6R15 125 230 ** 6   1-1/2" 38
HAR125240**6R15 125 240 ** 6   40 mm 40
HAR140100**6R15 140 100 ** 6   1-13/16" 46
HAR140150**6R15 140 150 ** 6   50 mm 50
HAR140230**6R15 140 230 ** 6   2 1/8" 54
HAR160100**6R15 160 100 ** 6   60 mm 60
HAR160150**6R15 160 150 ** 6   65 mm 65
HAR160230**6R15 160 230 ** 6      
 


Inward Helical Cutterheads

FEATURES

  • Inserts tilt inward, making the cutterhead suitable for edge bander.
  • Curved edge inserts ensure tear-free cutting and create finer surface effect.
  • The cutterhead body is manufactured from aluminum alloy, anodized, dyed and dynamically balanced for extra smooth running.
  • Keyway and bore size can be specified by customer.

    Curved Edge Insert
PART NO. CUTTING CIRCLE CUTTING LENGTH BORE DIAMETER SLOTS
HAI125042306R15 125 42 30 6
HAI125056309R15 126 56 30 9
 



FEATURES

  • Suitable for PAA, PAB and PAD series cutterheads.
  • H.S.S. knife material.
  • Quick lock system knife.
  • Knife can be surface ground to a minimum of 2.45 mm thickness.
  • Knives are 14 mm wide x 2.55 mm think.
 Quick Lock Knife Specification


 

Quick Lock System Instruction

STEP 1
Loosen set screws by using a 3mm hexagonal wrench.
 
STEP 2
Use the hexagonal wrench to gently tap down the gib, then you can take out the knives radially.
 
STEP 3
To mount new knives or use the other edge of the knife, make sure the knife is properly engaged with the cavity on the cutterhead body.
 
STEP 4
Tap down again the gib, then the gib will automatically precisely secure the knife in place. Finally, tighten all set screws.