Finish Planing / Profiling Cutterhead
 
 


Solid Profiling Knife

FEATURES

  • Knives for profile depth up to 12mm, suitable for PAB and PAD cutterheads.
PART NO. PROFILE DESCRIPTION
PKR3 Concave Radius R3 mm in TCT
PKR6 Concave Radius R6 mm in TCT
PKR10 Concave Radius R10 mm in TCT
PKDB Double back-out in TCT
PK45 Double Bevel 45 Degree in TCT
 


Dovetailed Profiling Knife

FEATURES

  • Profiling knife to mount into dovetail guide for cutterheads PAC and PAD
PART NO. PROFILE DESCRIPTION
HDDB Double Back-out Knife Holders and
Carbide Inserts
KD11 Carbide Insert D11 mm
 



FEATURES

  • Suitable for PAA, PAB and PAD series cutterheads.
  • H.S.S. knife material.
  • Quick lock system knife.
  • Knife can be surface ground to a minimum of 2.45 mm thickness.
  • Knives are 14 mm wide x 2.55 mm think.
 Quick Lock Knife Specification


 

Quick Lock System Instruction

STEP 1
Loosen set screws by using a 3mm hexagonal wrench.
 
STEP 2
Use the hexagonal wrench to gently tap down the gib, then you can take out the knives radially.
 
STEP 3
To mount new knives or use the other edge of the knife, make sure the knife is properly engaged with the cavity on the cutterhead body.
 
STEP 4
Tap down again the gib, then the gib will automatically precisely secure the knife in place. Finally, tighten all set screws.